How To Turn Off MyKey On A Ford Without The Admin Key
Last updated on July 19th, 2024 at 07:47 am
Have you scratched your head trying to figure out how to turn off MyKey Ford without admin key? This Ford MyKey book has everything you need to know.
Ford’s MyKey system is an intelligent way to adjust your car for each driver. It’s usually used to enforce speed limits, tell you if you’re going too fast, and limit your music while driving.
It always turns on the vehicle’s electronic safety features and can be set to stop certain things from happening while driving. If you own a Ford car with the MyKey system, you might want to know how to turn off MyKey Ford without admin key.
The MyKey system can help you track how much gas you use and set speed limits, but there may be times when you want to turn it off without MyKey.
This blog highlights the steps on how to turn off MyKey Ford without admin key.
Ford MyKey: What Is It?
The Ford MyKey system was made to give you peace of mind while moving in and around Conway and Murrells Inlet. Here’s what you need to do.
With Ford MyKey, only one key is needed to start the car, and the owner can set rules and settings for all the other keys.
Most drivers use this method to encourage and monitor their teenage riders and other new drivers.
It achieves its goals by limiting the top speed, reducing the use of in-car entertainment devices, and ensuring everyone in the front seat always wears a safety belt.
When a preset MyKey starts the car, the administrator can set a maximum speed limit and order the driver to use certain Ford safety features, driving aids, and Ford Co-Pilot360TM technologies.
What is the Admin Key for the Ford MyKey System?
What exactly is a Ford Admin Key, and how do you use one? Ford automobiles have an additional key called the Admin key. All options are customizable, and “always on” features can be disabled.
The Admin Key is required by the vehicle’s menu system to enable programming of additional key functions, locking of all other keys from the setup menu, and unlocking of limited additional keys to restore normal operation. What, though, if you want to disable Ford MyKey on a Ford Escape or F-150, but you don’t have access to the Admin key? Can that even happen?
Yes, it is! We will explain how to clear MyKey without admin key later in this blog, but first, let us discuss the steps to turn off Ford’s MyKey with an admin key.
Also Check: Where Can I Sell My Car For the Most Money Online?
How to turn off a Ford’s MyKey?
The easiest way to turn off Ford MyKey is to start the car with the administrator key or key fob. Once you have one of these, you can return every MyKey to its “admin key” original settings. Some ways to turn off Ford MyKey are:
- Get the car going. Watch the main computer of your car and look for signs of power.
- Look for the buttons on the steering wheel that control your instrument panel. Press the left arrow button to get to the main menu.
- Press “OK” to go back to the main screen, then select “Settings.”
- Once you’re in “Settings,” click on “MyKey,” and then click “OK.”
- Look for the choice to “Clear MyKey” under “MyKey.”
- Tap and press “OK” until the word “All MyKeys Cleared” appears on the screen. This will clear all of your MyKeys.
How To Turn Off Mykey Ford Without Admin Key?
MyKey is an anti-theft device that Ford cars can have put in. After it came out in 2007 for the first time, it quickly became a standard feature on all new Fords. You can use MyKey to limit your car’s top speed, how fast it can go, and how loud the music can be. You can show someone who doesn’t know how to drive safely how to use your keys if you have two sets. You can turn off MyKey in six ways that don’t require a master password:
Method 1
The first method how to turn off Ford MyKey without admin key is the reset option. The steps are as follows:
- Put the key in the starter.
- Turn the key, but don’t start the engine yet.
- Press and hold the button on the key fob that says “unlock.”
- Press and let go of the reset button three times while holding down the unlock button.
- When you press the reset button three times, the MyKey system will no longer work.
- Start your car and enjoy the ride!
Method 2
The second method how to turn off Ford MyKey without admin key includes the use of FORScan program. You can stop using MyKey once you download the FORScan program. Here are some guidelines to keep in mind.
- Start up the car.
- You can connect your car to the FORScan program with any connection that works.
- Start the Key On Engine Running (PCM KOER) program. This may take a few minutes, so please don’t hurry. It may look like it gets stuck at times, but keep waiting.
- To make your car driverless, take out the MyKey that was put into it.
- For normal key systems, you can stop the transmitter by wrapping foil around the fob.
- Turn off the engine of the car.
- Wait a minute and turn the key, but don’t start the car.
- Open the main screen by using the buttons on the driving wheel.
- Move your cursor to “Settings.”
- Choose “OK.”
- Find the “MyKey” choices by using the menu.
- Choose “OK.”
- Find the “Clear MyKey” choice and click on it.
- Keep holding “OK” down until you see the message “All MyKeys Cleared.”
After you see that message, any previously set MyKeys will be deleted. No longer will these MyKeys open doors. You can either get a new MyKey here or have an old one reprogrammed. Once again, your neighbourhood car lot is there to help.
Method 3
The last way how to clear mykey without admin key is to “hide” the identification signal of the limited key from the car:
- Enter the car, shut the doors, and start it as you usually would with the MyKey.
- Take note of the MyKey limitation messages shown on the driver info display.
- Wrap the MyKey with tin foil, or have someone else take the key and walk away of the vehicle: a 20-foot distance should be sufficient to “hide” the MyKey’s radio signal.
- If you open and shut a door, the car will notify you that it has not detected a key.
- Remove the limited MyKey from its tin foil wrapping (or have your helper deliver it to you), and then place the MyKey near the transponder scanner on the steering column.
- Turn the car off and then back on while holding the key in place.
- The instrument panel will still notify you that there is no key inside the vehicle, but it will launch the driver interface as if the Admin Key is there.
- To reset the MyKey capability via the SYNC screen or the driver data display, follow the above procedures.
- All MyKey limitations have been lifted, and the key has been assigned as an Admin Key.
How To Reprogram MyKey?
The good news is that reprogramming a MyKey isn’t too hard:
- Put the MyKey in the ignition or backup place if the car starts with a push button.
- Let the lights and the vehicle’s screen come on, too.
- Go to the main page and choose “Settings” from there.
- Once you’re in “Settings,” scroll down until you see “MyKey,” then tap “Create MyKey.”
- Press “OK” when asked to, and then wait a few minutes for the resetting process to finish.
How Can I Disable Ford MyKey?
Ford is the second-largest car company in the world because it has a keyless entry system called MyKey. Ford MyKey can help you feel better about the safety of your car and your family while driving.
Until everyone is buckled in, the speed limit is set to 80 mph, the music volume is turned down to half of its highest level, and the leisure systems are turned off. The radio also turns off after ten minutes of not being used or when the car is going backwards faster than 15 mph.
Ford MyKey can be an essential safety tool for drivers facing dangerous situations like snow, ice, and low vision. It annoys other drivers who don’t want to keep telling themselves to take their keys out of their pockets.
Ford MyKey is easy to turn off in case of an emergency. Most of the time, the keys need to be reprogrammed. Expert techs can help you with this because they know how to get around Ford MyKey.
Will disconnecting the battery reset MyKey?
Disconnecting the battery will disable Ford MyKey without admin key. The MyKey system from Ford is meant to make customers feel safer and more comfortable on the road. If the car has been on for too long, the battery may die. Until the battery is changed, MyKey won’t work. Whether or not you can restart Ford MyKey will depend on how old your key fob is and what kind of car you have.
But if your car was made before 2008, it might not work at all because it doesn’t have an immobiliser system that can identify things like fuel injection or lighting in the engine. Cars made after 2012 should work, though.
If your car also has an immobiliser device that keeps track of the gas pedal and the key, pulling the plug won’t reset Ford MyKey. Your car’s engine will shut off because of this. Every time you get behind the wheel, you have to turn off the keyless entry system, which is a pain.
If your MyKey system works even when the car’s engine is off, you can use the key fob again after taking the battery out.
FAQs About How To Turn Off Ford MyKey Without Admin Key
How do I bypass MyKey volume on my Ford?
If you have the Administrator Key, you can simply turn off the MyKey volume limit in the settings menu. To do this, follow these steps:
- Start the car.
- Press the “Info” button on the steering wheel.
- Use the arrow buttons to navigate to the “Settings” menu.
- Select the “MyKey” option.
- Use the arrow buttons to navigate to the “Volume Limit” option.
- Press the “OK” button to turn off the volume limit.
How do I turn off MyKey active drive safely?
To turn off MyKey Active Drive Safely, you must use the admin key. The admin key is the original key that came with your vehicle. Follow these steps:
- Start your vehicle with the admin key.
- Press the “OK” button on the steering wheel to access the main menu.
- Use the arrow buttons to scroll to the “Settings” option and press the “OK” button.
- Scroll to the “MyKey” option and press the “OK” button.
- Scroll to the “Clear MyKey” option and press and hold the “OK” button until you see the message “All MyKeys Cleared.”
Once you have completed these steps, MyKey Active Drive Safely will be disabled.
Can Ford dealer reset MyKey?
Yes, a Ford dealer can reset MyKey. They will need to use a diagnostic tool to access the MyKey settings and then change them to disable the restrictions.
Will unplugging the battery reset MyKey?
Yes, disconnecting the battery will reset and disable Ford MyKey without admin key. This is because the MyKey system is stored in the car’s computer, and when the battery is disconnected, the computer is reset.
To reset the MyKey system, follow these steps:
- Disconnect the negative battery cable.
- Wait for at least 10 minutes.
- Reconnect the negative battery cable.
- Start the car and drive it for a few miles.
How much does Ford charge for a new admin key?
The price of a new Ford admin key varies depending on the model of your vehicle and the dealership you go to. However, you can expect to pay around $350 for a new key.
Conclusion
MyKey is a fantastic safety feature, but knowing how to bypass it in an emergency is crucial. There are a few options for accomplishing this, and your chosen one should be tailored to your needs.
Contact your local Ford dealer or a qualified mechanic if you have trouble bypassing MyKey. They’ll know how to diagnose the problem and get you back on the road quickly and securely. I appreciate you taking the time to read this.